You are no stranger to injunctions, but you may not know the principles of injunctions. Follow us to learn.
First, the section management ban sign is set
The purpose of the section management ban sign is to control the traffic flow of the section or the traffic flow and velocity of the section, so as to guarantee traffic safety and improve the capacity of the section.The starting point of the controlled section should be set up with the control mark, the single-lane line should be set up at the entrance, and the no-entry sign should be set at the exit.At the beginning of the regulated road section, each entrance shall be marked with corresponding control signs. The guangzhou traffic sign company believes that the purpose is to avoid unnecessary traffic jams.There should be corresponding prohibitions left, right and no direct signs at several other entrances.Where there is a t-junction in the middle of a controlled road, the control mark shall be placed on the road where the controlled road intersects.When the restricted vehicle near the end of the controlled road which intersects the controlled road is unable to make a detour or turn around, a warning sign can be placed at the appropriate place prior to the crossing.Where there is an intersection or roundabout in the middle of a control road, the control mark shall be placed at the starting point of the intersection or roundabout where the control road is separated by an intersection or roundabout.
2. The intersection management ban sign is set
Shenzhen Dazhan Tenology industry Co.,ltd told everyone that the main purpose of the intersection management ban sign is to clarify the primary and secondary traffic, and to rationally distribute the left, right and straight traffic flow, reduce the intersection, so as to ensure traffic safety and improve the capacity of the intersection.The intersection management ban sign should be placed at the appropriate position before the intersection or at the intersection with the upper rail, traffic light or central divider according to the specific measures of traffic management.When a road there are a number of intersections, should give full play to the ban marks to the entrainment of traffic, reasonable induced traffic, such as in some large or small intersection traffic interference road motor vehicles is forbidden, and the induction motor vehicle in the crossing into the designated place, to effectively distribute traffic flow, improve the traffic capacity, to avoid congestion.
3. Regional management of the establishment of the ban sign
Shenzhen Dazhan Tenology industry Co.,ltd told everyone that the purpose of the regional management ban sign setting is to control the traffic flow into the region, so as to guarantee traffic safety, avoid traffic jam within the region, and improve the road capacity within the region.The control mark shall be set at the intersection or bridge beam along the route outside the control area. When the control mark is limited to the place where the vehicles can not go around or turn around, the warning can be set at the appropriate place before, and the mark that is identical with or contradictory to the control mark to be set within the control area shall be removed.The goods can only be delivered after the signature of the clerk.
Related Industry Knowledge
- Warning column installation method
- The technical principle of solar energy
- The advantages of solar energy
- The disadvantages of solar energy
- Solar energy applications
- Solar fuel utilization
- Solar power generation system
- Solar energy history
- Solar laws and regulations
- Solar energy development prospects
- How to choose a better PVC Traffic Fence?
- what is the types and functions of guardrails
- Is there a difference between a highway and exp...