Home > Knowledge > Content
Tell you what the setting features of the sign are
- Sep 20, 2018 -

Shenzhen Dazhan Tenology Industry Co.,Ltd tell everyone traffic sign for traffic participants offers a clear and intuitive, easy to traffic information, to ensure safe and smooth in traveler driving, walking, bigger roads and functions, the practice proved that the reasonable setting of traffic signs, can reduce the number of traffic accidents, don't let the traffic jam, energy savings, beautify along the road and surrounding environment, the following Settings feature are what we are going to say .

I. the features of the traffic signs and signs are as follows

1. The locations of traffic signs are not affected by each other, and there is no other structure to block the line of sight.

2. The sign setting near the interchange and service area shall be based on the principle that the driver's sight will not be affected when traffic vehicles are close to the intersection or diverging or confluence.

3, signs look everything always car direction, at right angles to the road to the basic layout, board face slightly inward tilt, on the issue of the roadside sign of tilt, there are different opinions, the specification of some countries believe that only when the sign board with the shoulder edge more than 9 m apart when inward tilt, when the sign board and shoulder edge distance less than 9 m, for does not let dizzy phenomenon caused by reflection, will it outward tilt 3 °.


4, Shenzhen Dazhan Tenology Industry Co.,Ltd introduced to sign can let the driver reaction time setting in order to make the safe operation of the judgment, therefore, play a role in order to make the logo content, sign should be set a schedule, here, you also need to be clear, the panel size, the greater the logo content is simple, the distance of schedule can be smaller.

5, usually flag are set on the right side of the road and the driver are eager to find the location of the passing lane, driveway, emergency parking area this kind of lane and road signs, set up in a roadside do have difficulty, usually adopt portal support, install over the road sign board, in order to facilitate the pilot interpretation, on the highway near the end, some will also ban or warning sign set separation zone in the middle.

6. Shenzhen Dazhan Tenology Industry Co.,Ltd tells us that there is a net distance of 25cm between the roadside sign and the outer edge of the shoulder, 2m clearance between the underside edge of the sign plate and the outer road surface of the emergency stop zone, and the sign set above the road, so that the net distance between the underside edge and the road surface is >5m.

7 - 副本.jpg

Related Products