Road traffic signs and lines is set up on the road with graphics, symbols, text, lines, stipulated by the elevation tags, protuberant road signs to represent specific management content and behavior rules of traffic facilities.Typical examples are 72 kinds of road traffic mark lines and 15 road construction safety facilities.This standard is applicable to roads, urban roads, mining areas, port areas, forest areas, field (factory) roads and all vehicles and pedestrians driving on these roads.For road traffic signs and marking shape, design, text, color, material, construction, production, installation, reflective, lighting, location for the setting principles, setting up regulations such as the corresponding technical requirements
road traffic signs
It is divided into two categories: main marks and auxiliary marks.
Warning signs: signs that warn vehicles and pedestrians of danger spots.
Injunctive marks: marks that prohibit or restrict the traffic of vehicles and pedestrians.
Signs: signs indicating the movement of vehicles and pedestrians.
Direction mark: a mark that conveys the direction, location, and distance of a road.
Tourist area signs: provide the direction and distance of tourist attractions.
Road construction safety sign: the sign announcing the passing of road construction area.
A mark attached to a main mark that ACTS as an auxiliary indicator.
Folding road traffic lines
Road traffic mark line is a traffic safety device composed of various lines, arrows, characters, elevation marks, protruding road signs and contours marked on the road surface.Its function is to control and guide traffic.It can be used in conjunction with the logo or separately.
Road traffic mark lines can be divided into the following three types according to the setting method:
A) vertical demarcation line set along the road running direction;
B) the demarcation line set at an Angle between the horizontal demarcation line and the driving direction of the road;
C) other marking characters or other forms of marking.
Road traffic mark lines can be divided into the following three categories according to their functions:
A) marking line indicating roadway, driving direction, road edge, sidewalk and other facilities.
B) special requirements, such as compliance, prohibition and restriction of road traffic, etc., which shall be strictly observed by vehicle drivers and pedestrians.
C) warning mark line to enable vehicle drivers and pedestrians to understand the special conditions on the road, increase vigilance and prepare for emergency response measures.
Road traffic routes can be divided into the following four types by type:
A) solid or dashed lines marked on the road surface, the curb or the facade.
B) characters, Numbers and graphic symbols marked on the road surface.
C) the raised road sign is installed on the road surface to mark the reflective or non-reflective body of lane boundaries, edges, confluence, curves, dangerous sections, changes in road width, and position of obstacles on the road surface.
D) backlight column (or sheet) mounted on both sides of the road to indicate the direction of the road and the contour of the roadway boundary.
The demarcation of road traffic mark lines is as follows:
A) when white dotted lines are drawn on the road section, they are used to separate the traffic flowing in the same direction or to identify the driving safety distance;To guide a vehicle at an intersection.
B) when the solid white line is drawn on the road section, it is used to separate motor vehicles and non-motor vehicles driving in the same direction, or to indicate the edge of the roadway;When set at a junction, it can be used as a leading lane line or stop line.
C) when the yellow dotted line is drawn on the road section, it is used to separate the traffic flow in the direction of driving.When rowed on the side of the road or on the curb, it is used to prohibit vehicles from parking along the road for a long time.
D) the yellow solid line is used to separate the traffic flow in the direction of driving when it is drawn on the road section;When rowed on the side of the road or on the curb, it is used to prohibit vehicles from parking on the road for a long time or temporarily.
E) when a double-white dotted line is drawn at an intersection, it shall be used as a deceleration line;When set in a section, it is used as a variable lane line whose driving direction changes with time.
F) when the double-yellow solid line is drawn on a section of road, it is used to separate the traffic flowing in the opposite direction.
G) when the yellow dotted line is drawn on a section of road, it is used to separate the traffic flowing in the opposite direction.Vehicles are not allowed to overtake, cross or turn on one side of the yellow solid line, and vehicles are allowed to overtake, cross or turn on the yellow dotted line while ensuring safety.
H) when a double white solid line is drawn at an intersection, it shall be used as a stop line to give way.